Fatigue behavior and morphology in selective laser melted Ti-6Al-4V cellular materials

Michele Dallago; Valerio Luchin; Gianluca Zappini; Sunil Raghavendra; Damiano Pasini; Matteo Benedetti

doi:10.18416/AMMM.2019.1909S10T01

Transactions on Additive Manufacturing Meets Medicine
Vol. 1 No. 1 (2019): Trans. AMMM

Fatigue behavior and morphology in selective laser melted Ti-6Al-4V cellular materials

Michele Dallago , Valerio Luchin , Gianluca Zappini , Sunil Raghavendra , Damiano Pasini , Matteo Benedetti

This work is licensed under a Creative Commons Attribution 4.0 International License.

Abstract

Selective Laser Melting (SLM) has shown great potentialities in the production of lattice materials due to the intrinsic advantages of rapid prototyping technologies. Nevertheless, the low accuracy and precision of this manufacturing process is a well-known issue that is critically important for the fatigue properties of metallic lattices with strut thicknesses of a few hundred microns. In this work, we discuss some aspects regarding the relationship between the as-built morphology of SLM Ti-6Al-4V cubic cell lattice structures and their fatigue properties.

How to Cite

Fatigue behavior and morphology in selective laser melted Ti-6Al-4V cellular materials. (2019). Transactions on Additive Manufacturing Meets Medicine, 1(1). https://doi.org/10.18416/AMMM.2019.1909S10T01

References

How to Cite

Most read articles by the same author(s)

Lorena Emanuelli, Alireza Jam, Anton du Plessis, Carlo Lora, Raffaele De Biasi, Matteo Benedetti, Massimo Pellizzari, 3D metrological characterization of functionally graded porous beta-titanium cellular structures to reproduce the complex internal human bone architecture , Transactions on Additive Manufacturing Meets Medicine: Vol. 4 No. S1 (2022): Trans. AMMM Supplement
Lorena Emanuelli, Raffaele De Biasi, Melika Babaei, Anton du Plessis, Andrea Trivisonno, Giovanna Dall'Amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari, Mechanical and metrological characterization of two different porous beta titanium cellular structures made by laser powder bed fusion , Transactions on Additive Manufacturing Meets Medicine: Vol. 5 No. S1 (2023): Trans. AMMM Supplement
Raffaele De Biasi, Lorena Emanuelli, Melika Babaei, Sara Azevedo, Andrea Trivisonno, Giovanna Dall'amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari, Beta titanium novel porous hip implant design for stress shielding reduction , Transactions on Additive Manufacturing Meets Medicine: Vol. 5 No. S1 (2023): Trans. AMMM Supplement
Melika Babaei, Lorena Emanuelli, Raffaele De Biasi, Andrea Trivisonno, Giovanna Dall'amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari, The Role of Unit Cell Geometry on Biocompatibility of Beta-Ti Lattice Scaffolds , Transactions on Additive Manufacturing Meets Medicine: Vol. 5 No. S1 (2023): Trans. AMMM Supplement
Alireza Jam, Massimo Pellizzari, Matteo Benedetti, Laser metal fusion of beta Ti 21S alloy , Transactions on Additive Manufacturing Meets Medicine: Vol. 1 No. S1 (2019): Trans. AMMM Supplement
Sofia Vignali, Raffaele De Biasi, Lorena Emanuelli, Melika Babaei, Anton du Plessis, Massimo Pellizzari, Matteo Benedetti, Advanced Hip Implants: Combining a novel metastable beta-Ti alloy and lattice structures to reduce stress shielding , Transactions on Additive Manufacturing Meets Medicine: Vol. 7 No. S1 (2025): Trans. AMMM Supplement
Melika Babaei, Lorena Emanuelli, Raffaele De Biasi, Eleonora Fadelli, Francesca Agostinacchio, Anton du Plessis, Antonella Motta, Michele Fedel, Matteo Benedetti, Massimo Pellizzari, Electropolishing of porous beta-Ti21S implant: balancing mechanics and biocompatibility , Transactions on Additive Manufacturing Meets Medicine: Vol. 7 No. S1 (2025): Trans. AMMM Supplement

Transactions on Additive Manufacturing Meets Medicine

Main Article Content

Abstract

Article Details

How to Cite

References

How to Cite

Most read articles by the same author(s)