Reproduction of printed microtextures on Ti-Implants

Thomas Friedrich; André Behrends; Annika Dell; Roman Leonov; Thorsten Buzug

doi:10.18416/AMMM.2024.24091876

Transactions on Additive Manufacturing Meets Medicine
Vol. 6 No. S1 (2024): Trans. AMMM Supplement

Surface finishes in medical applications: Advances and impact on device efficacy, 1876

Reproduction of printed microtextures on Ti-Implants

Thomas Friedrich , André Behrends , Annika Dell , Roman Leonov , Thorsten Buzug

This work is licensed under a Creative Commons Attribution 4.0 International License.

Abstract

In order to understand and optimize the topological possibilities of the production equipment and the process, this work presents a convenient and reproducible way to analyze the capabilities to incorporate a micro texture to the printed part.

How to Cite

Reproduction of printed microtextures on Ti-Implants. (2024). Transactions on Additive Manufacturing Meets Medicine, 6(S1), 1876. https://doi.org/10.18416/AMMM.2024.24091876

References

How to Cite

Reproduction of printed microtextures on Ti-Implants. (2024). Transactions on Additive Manufacturing Meets Medicine, 6(S1), 1876. https://doi.org/10.18416/AMMM.2024.24091876

Most read articles by the same author(s)

Hannes Schwenke, Leonora Calopresti, Thorsten M. Buzug, Peter Schramm, Thomas Friedrich, Modular simulation of neuroangiography and endovascular interventions in neuroradiology , Transactions on Additive Manufacturing Meets Medicine: Vol. 3 No. 1 (2021): Trans. AMMM
Anna C. Bakenecker, Anselm von Gladiss, Hannes Schwenke, André Behrends, Thomas Friedrich, Kerstin Lüdtke-Buzug, Alexander Neumann, Zuzana Penxová, Joerg Barkhausen, Franz Wegner, Thorsten M. Buzug, Fabrication of a steerable magnetic micro-robot , Transactions on Additive Manufacturing Meets Medicine: Vol. 3 No. 1 (2021): Trans. AMMM
Thomas Friedrich, Maximilian Wattenberg, Ludger Tüshaus, Lutz Wünsch, Thorsten M. Buzug, Presurgical practice of supracondylar domosteotomie of cubitus varus deformity on 3D printed humerus , Transactions on Additive Manufacturing Meets Medicine: Vol. 1 No. 1 (2019): Trans. AMMM
Annika Dell, Franz Wegner, Eric Aderhold, Thorsten M. Buzug, Thomas Friedrich, Stenosis simulation of femoral arteries using an adaptive 3D-printed actuator , Transactions on Additive Manufacturing Meets Medicine: Vol. 3 No. 1 (2021): Trans. AMMM
Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug, Evaluation of 3D-printing materials for the simulation of osteotomies , Transactions on Additive Manufacturing Meets Medicine: Vol. 1 No. 1 (2019): Trans. AMMM
Thomas Friedrich, Franz Wegner, Thorsten Buzug, 3D-printing of elastic stenosis phantoms , Transactions on Additive Manufacturing Meets Medicine: Vol. 2 No. 1 (2020): Trans. AMMM
Huimin Wei, Andre Behrends, Thomas Friedrich, Thorsten Buzug, Using 3D printing to implement a hyperthermia insert for a preclinical MPI scanner , Transactions on Additive Manufacturing Meets Medicine: Vol. 2 No. 1 (2020): Trans. AMMM
Jakob Seemann, Thomas Friedrich, Thorsten Buzug, Peter Schramm, Hannes Schwenke, A topology optimization workflow for interfaces with anatomy-based designs , Transactions on Additive Manufacturing Meets Medicine: Vol. 4 No. 1 (2022): Trans. AMMM
Justin Ackers, Anna C. Bakenecker, Thorsten M. Buzug, Matthias Graeser, Printing of hard ferromagnetic materials for remote magnetic actuation , Transactions on Additive Manufacturing Meets Medicine: Vol. 3 No. 1 (2021): Trans. AMMM
Annika Dell, Freschta Malekzada, Jannis Hagenah, Georg Männel, Thomas Friedrich, Michael Thomaschewski, Thorsten Buzug, Tobias Keck, 3D-printed anatomical models for robotic surgery training exercises , Transactions on Additive Manufacturing Meets Medicine: Vol. 5 No. S1 (2023): Trans. AMMM Supplement

1 2 3 4 > >>

Transactions on Additive Manufacturing Meets Medicine

Main Article Content

Abstract

Article Details

How to Cite

References

How to Cite

Most read articles by the same author(s)